Program Trunk Names - Samsung DCS-816 System Administration And Special Features Manual
Hide thumbs
Also See for DCS-816:
- Programming manual (313 pages) ,
- Installation manual (44 pages) ,
- General description manual (42 pages)
Table of Contents
Advertisement
SAMSUNG
DCS-816
The # key is used to select the following special characters (in sequence of key presses):
#
space
&
)
_
+
3.5 PROGRAM TRUNK NAMES
This program is used to assign a name or identification to each C.O. line. You may assign
a name up to 11 characters long.
PROGRAM KEYS
UP & DOWN
KEYPAD
HOLD
Open customer programming and follow the instructions below.
ACTION
1.
Select 404
2.
Dial trunk (e.g., 704)
OR press UP or DOWN to select trunk and press the
right soft key to move the cursor
3.
Enter the trunk name using the procedure in 3.4 Pro-
gram Station Names and press the right soft key to
return to step 2
4.
Press TRSF to store and exit programming
OR press SPEAKER to store and advance to the next
program
!
:
?
.
,
{
}
|
;
"
Select trunk and move cursor.
Used to enter characters.
Press to clear entry.
System Administration and Special Features Guide
%
$
-
<
>
→ → → →
`
[MMC 404]
3 - 4
/
=
[
]
@
DISPLAY
[701] TRUNK NAME
[704] TRUNK NAME
[704] TRUNK NAME
SAMSUNG
March 1999
^
(
Advertisement
Table of Contents
