Example: Deleting A System Board - Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual

4.3

Example: Deleting a System Board

This section provides an example of operation to delete a system board from a
domain. In the example, a procedure conforming to
System Board" on page
deleted using the XSCF shell.
FIGURE 4-6
Domain#0
XSB#00-0
1. Login to XSCF.
2. Check the status of the domain.
Execute the showdcl(8) command to display domain information, and then
check the operation status of the domain. Based on the operation status of the
domain, determine whether to perform the DR operation or change the domain
configuration.
XSCF> showdcl -d 0
DID
00
4-8 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • September 2007
4-3, is used, and the system board shown in the figure is

Example: Deleting a System Board

XSB#01-0
LSB XSB Status
Running
00 00-0
01 01-0
Domain#0
XSB#00-0
Delete
Section 4.1.2, "Flow: Deleting a
XSB#01-0