Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual page 134

[Explanation] A claim request with a nonzero hint came from the fcode
interpreter.
[Remedy] If DR failed after this message, please contact customer service.
opl_claim_memory - unable to allocate contiguous memory
[Explanation] Memory allocation failed for the fcode interpreter.
[Remedy] If DR failed after this message, please contact customer service.
opl_get_fcode: Unable to copy out fcode image
[Explanation] Failed to copy out the fcode image to the efcode daemon.
[Remedy] If DR failed after this message, please contact customer service.
opl_get_hwd_va: Unable to copy out cmuch descriptor for <addr>
[Explanation] Failed to copy out the cmuch HWD to the efcode daemon.
[Remedy] If DR failed after this message, please contact customer service.
opl_get_hwd_va: Unable to copy out pcich descriptor for <addr>
[Explanation] Failed to copy out the pcich HWD to the efcode daemon.
[Remedy] If DR failed after this message, please contact customer service.
IKP: create leaf (<board>-<channel>-<leaf>) failed
[Explanation] A device node was not created for a PCI device.
[Remedy] If DR failed after this message, please contact customer service.
IKP: Unable to probe PCI leaf (<board>-<channel>-<leaf>)
[Explanation] The fcode interpreter returned a bad status for the probe.
[Remedy] If DR failed after this message, please contact customer service.
IKP: Unable to bind PCI leaf (<board>-<channel>-<leaf>)
[Explanation] The driver binding fails, after the leaf has been probed.
[Remedy] If DR failed after this message, please contact customer service.
IKP: destroy pci (<board>-<channel>-<leaf>) failed
[Explanation] The node was not destroyed.
[Remedy] Please contact customer service.
IKP: destroy pseudo-mc (<board>) failed
A-18 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • September 2007