Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual page 125

Cannot stop user thread: <pid> <pid> ...
[Explanation] The DR driver cannot stop all the user processes in the list.
[Remedy] Please contact customer service.
[Output] Console and Standard Output
Cannot setup memory node
[Explanation] DR is unable to read the HW information for the memory device.
[Remedy] Please contact customer service.
Kernel Migration fails. 0xX
[Explanation] Kernel data migration failed as a result of DR detach.
[Remedy] Please contact customer service.
TOD on board X has already been attached.
[Explanation] Time of Date Clock on board X has been attached. This may be a
minor inconsistency in the system.
[Remedy] Please contact customer service.
TOD on board X has already been removed.
[Explanation] Time of Date Clock on board X has been removed. This may be a
minor inconsistency in the system.
[Remedy] Please contact customer service.
Unable to detach last available TOD on board X
[Explanation] Detaching the system board will result in detaching the last
available Time of Date clock.
[Remedy] Attach another system board before detaching.
Device in fatal state
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
[Output] Console and Standard Output
I/O error: dr@0:SBX::memory
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
[Output] Console and Standard Output
Appendix A Message Meaning and Handling A-9