XSCF manages the following aspects of domain status:
TABLE 2-2
Status
Powered Off
Initialization Phase
OpenBoot Executing
Completed
Booting
Running
Shutdown Started
Panic State
To perform a DR operation for a system board, you must determine the method of
DR operation according to the status of the relevant domain. The conditions of
domain status available for DR operation are described in individual sections of
Chapter
section.
2.4.2
System Board Status
XSCF manages system board status in units of XSB for the following management
items:
TABLE 2-3
Management item
Power
Test
Assignment
Connectivity
Configuration
2-18
SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • September 2007
Domain Status
Description
Domain power is off.
POST processing or OpenBoot PROM initialization is in progress.
Initialization of OpenBoot PROM is completed.
Solaris OS is being booted or, due to the domain being shutdown or
reset, the system is in the OpenBoot PROM running state or is
suspended in the OpenBoot PROM (ok prompt) state.
Solaris OS is running.
Solaris OS is being shut down.
Solaris OS has panicked.
, DR User Interface. For details of each method used for DR, see the relevant
System Board Management Items
Description
Power on/off status of system board
Diagnostic status of system board
Status of assignment to domain
Status of connection to domain
Status of addition into Solaris OS