Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual page 83

Options of the moveboard Command (Continued)
TABLE 3-15
Option Description
Specifies that the command delete a system board from the move-
-c assign
source domain and assign it to the move-destination domain.
The assigned system board is added to the move-destination domain
when the addboard(8) command is executed in the move-destination
domain, the power of the move-destination domain is turned on, or
the move-destination domain is rebooted.
The move operation from the move-source domain is performed and
the system board is set to the state where it is assigned to the move-
destination domain when the domain power is off in both the move-
source domain and the move-destination domain or the Solaris OS is
not running in both domains.
Specifies that the command reserve a system board move in the
-c reserve
move-source domain.
The system board is deleted from the move-source domain and
assigned to the move-destination domain when the power of move-
source domain is turned off or the move-source domain rebooted.
The assigned system board is added to the move-destination domain
when the addboard(8) command is executed in the move-destination
domain, the power of the move-destination domain is turned on, or
the move-destination domain is rebooted.
The move operation from the move-source domain is performed and
the system board is set to the state where it is assigned to the move-
destination domain when the domain power is off or the Solaris OS is
not running in the move-source domain.
-d domain_id Specifies the domain ID of the move-destination domain, where
domain_id is the domain number, possibly 0 to 23, depending on
server model. Only one domain ID can be specified.
xsb Specifies the system board (XSB) number of the system board to be
moved.
Specify xsb in the XX-Y format. (XX = 00 to 15, Y = 0 to 3). The value
depends on server model. To specify multiple system boards, several
XSB numbers can be specified by delimiting each with a space.
Note – (Note 1) The time required for system board deletion processing in the
move-source domain depends on the amount of hardware resources mounted on the
target system board. Moreover, in the system board addition processing in the move-
destination domain, the system board to be added is first diagnosed, and then added
to the domain. For this reason, much time may be required for the command to end
its operation. Solaris OS is suspended for a while when the system board includes
kernel memory.
Chapter 3 DR User Interface 3-21