Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual page 157

privileges Specific permissions granted to users. This system has platform administrator,
platform operator, domain administrator, domain operator, domain manager,
user administrator, audit administrator, audit operator and field engineer
privileges during the XSCF program running.
Quad-XSB One of the division types for a PSB to be configured. Quad-XSB is a name for
when a PSB is logically divided into four parts. The division type can be
changed by using the XSCF command setupfru(8). Quad-XSB may be used to
describe a PSB division type or status.
SCF See "eXtended System Control Facility".
Secure Shell (SSH) A software program which allows the user to log into another system over a
network, execute commands on a remote machine, and to move files from one
machine to another. It provides strong authentication and secure
communications over insecure channels.
Service Processor A small system that directs system start up, reconfiguration, and fault
diagnosis. The Service Processor indicates XSCF in this system. When the
service processor is described as hardware, it indicates XSCFU.
system board Component unit that enables the CMU and the IOU hardware resources to
constitute a domain. CPU modules and memories are mounted on the CMU.
CPU modules and memory modules are mounted on the mother board (MBU)
in the mid-range system.Onboard I/O devices such as a PCI card, hard disk,
and LAN port are mounted in the IOU.
Uni-XSB One of the division types for a PSB to be configured. Uni-XSB is a name for
when a PSB is logically only one unit (undivided status). It is a default value
setting for the division type for a PSB. The division type can be changed by
using the XSCF command setupfru(8). Uni-XSB may be used to describe a
PSB division type or status.
See eXtended system board.
XSCF
XSCF Shell The CLI interface of the XSCF.
XSCF Web The BUI (Browser User Interface) interface of the XSCF.
Glossary-3