Removing A Usb Front Panel; Extensions To The System Board; Upgrading Main Memory - Fujitsu Siemens Computers PRIMERGY ECONEL 10 Operating Manual

Extensions to the system board

Removing a USB front panel

1
Ê
Remove the system board carrier as described in
Ê
Disconnect the cable from the USB front panel and from the system board.
Ê
Remove the screws (1) and take out the USB front panel of the slot (2).
Ê
Remount the bay cover from the front.
Extensions to the system board
Details of how and if you can upgrade the main memory or the processor of your PC are provided in
the Technical Manual for the system board. Below the necessary steps are described to enable you
to work on the system board.
Ê
Open the system unit (see

Upgrading main memory

Ê
Upgrade the memory as described in the system board Technical Manual.
Ê
Close the system unit (see
A26361-K831-Z100-1-7619
2
"Opening the system
"Assembling the system
"Replacing processor".
unit").
unit").
System expansions
45