Table of Contents
Advertisement
3.2
Command Reference
This section lists the DR commands and other commands related to DR.
For details of the commands, refer to SPARC Enterprise M4000/M5000/M8000/M9000
Servers XSCF Reference Manual. For the DR commands, see
the DR User Interface" on page
Note – (Note 1)
each command, you must have appropriate administrator privileges. For details, refer to
SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual.
Note – (Note 2)
commands, refer to SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference
Manual.
TABLE 3-16
Command name
showdcl
showdomainstatus
showboards
showdevices
showfru
TABLE 3-17
Command name
setdcl
setupfru
addboard
deleteboard
moveboard
3-1.
Use of each command is restricted to selected administrators only. To use
This section does not list all commands related to DR. For other DR-related
DR Display Commands
Function
Displays the DCL and the domain status.
Displays domain status.
Displays system board information.
Displays information about the CPUs, memory, and I/O devices on
system boards.
Displays PSB configuration information.
DR Operation Commands
Function
Updates and edits the DCL.
Sets the division type and memory mirror mode for PSB.
Adds a system board into a domain.
Deletes a system board from a domain.
Moves a system board between domains.
Section 3.1, "How To Use
Chapter 3 DR User Interface
3-25
Advertisement
Table of Contents
