Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual page 71

Items of System Board Information to be Displayed (Continued)
TABLE 3-8
Display items Description
Test Diagnostic status of system board
Unmount
Unknown
Testing
Passed
Failed
Fault Normal/abnormal status of system board
Normal
Degraded
Failed
COD Indication of whether the system board is a COD board.
n
y
The following examples show displays of the showboards(8) command
Example 1: Display of information on all system boards
■
XSCF> showboards -a
XSB DID(LSB) Assignment
------------------------------------------------------------------
00-0 00(00) Assigned
00-1 00(01) Assigned
00-2 SP Available
00-3 01(15) Assigned
The system board is not mounted or cannot be
recognized because it is faulty.
The system board is not being diagnosed.
testing.
The system board was tested, and passed.
A system board error was tested, and failed.
The system board cannot be used or has been
degraded.
Normal.
Components have been degraded, but the system
board is operating. Degraded here means that a
system board included in the corresponding
.
component is faulty
The system board cannot operate because of an error.
The board is not a COD board.
The board is a COD board.
Pwr Conn Conf
y y y
y n n
y n n
y y y
Chapter 3 DR User Interface
Test Fault
Passed Normal
Passed Degraded
Unknown Normal
Passed Normal
3-9