Example: Replacing A Uni-Xsb System Board - Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual

4.5.1

Example: Replacing a Uni-XSB System Board

FIGURE 4-8
Domain#0
1. Login to XSCF.
2. Check the status of the domain.
Execute the showdcl(8) command to display domain information, and then
check the operation status of the domain. Based on the operation status of the
domain, determine whether to perform the DR operation or replace the system
board after stopping the domain.
XSCF> showdcl -d 0
DID
00
3. Check the status of the system board to be replaced.
Execute the showboards(8) command to display system board information, and
then check the status of the system board to be deleted. The DR operation for
replacement may not be possible if the board to be replaced does not support the
DR delete operation.
XSCF> showboards 01-0
XSB
-----------------------------------------------------------------
01-0
Example: Replacing a Uni-XSB System Board
XSB#00-0
XSB#01-0
LSB XSB Status
Running
00 00-0
01 01-0
DID(LSB) Assignment
00(01) Assigned
Faulty
system
Delete
board
Add
Pwr Conn Conf
y y y
Chapter 4 Practical Examples of DR
Replace
New
system
board
Test Fault
Passed Normal
4-13