Table 2-4 System Board Management Items - Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual

The table below lists the status types available for individual management items.
System Board Management Items
TABLE 2-4
Management item Status
Power Power Off
Power On
Test unmount
unknown
testing
passed
failed
Assignment unavailable
available
assigned
Connectivity disconnected
connected
Configuration unconfigured
configured
XSCF changes and configures system board status according to the conditions under
which a system board is installed, removed, or registered in the DCL, or when a
domain is started or stopped. System board status also changes when the system
board is added, deleted, or moved by DR.
Description
The system board is powered off and cannot be
used.
The system board is powered on.
The system board is not mounted or cannot be
recognized, perhaps because it is faulty.
The system board is not being diagnosed.
Testing
Passed
A system board error was detected and the board
has been deconfigured.
The system board cannot be used. The reason
might be one of the following:
- The board is faulty.
- The board is not listed in the domain's DCL.
- The domain or board is not configured.
- The board is assigned to another domain.
The system board can be used and is registered in
the domain's DCL.
The system board is in this status when in the
system board pool.
The system board is reserved or assigned to the
domain.
The system board is disconnected from the
domain configuration and is in the system board
pool.
The system board is connected to the domain
configuration.
The hardware resources of the system board have
been deleted from the Solaris OS.
The hardware resources of the system board have
been added into the Solaris OS.
Chapter 2 What You Must Know Before Using DR 2-19