Table 3-11 Options Of The Showfru Command; Table 3-12 Items Of System Board Configuration Information To Be Displayed - Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual

TABLE 3-11
Option
-a
-h
device
location
The table below lists the items displayed by the showfru(8) command.
TABLE 3-12
Display items
Device
Location
XSB Mode
Memory
Mirror
Mode
The following example shows a display of the showfru(8) command.
Example: Display of configuration information on all system boards
■
XSCF> showfru -a sb
Device
sb
sb
sb
sb
3-14 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • September 2007
Options of the showfru Command
Description
Specifies that the command display all configuration information on
devices of the type specified by devtype.
Displays usage information.
Specifies a device type. Specify "sb" for DR.
Specifies a device name. Specifies a physical system board (PSB)
number. Specify a decimal number from 00 to 15 for PSB. To display
information about multiple system boards, several PSB numbers can
be specified by delimiting each with a space. The range of PSB
numbers to be specified varies depending on the model used.
Items of System Board Configuration Information to be Displayed
Description
Device type.
"sb" is the corresponding device for DR.
Mounting location of a device.
Displays a physical system board (PSB) number.
XSB division type.
Uni Uni-XSB (no division) mode.
Quad Quad-XSB: four-division mode.
Memory mirror mode.
yes Memory mirror mode is enabled.
no Memory mirror mode is disabled.
Location XSB Mode
00 Quad
01 Quad
02 Quad
03 Uni
Memory Mirror Mode
yes
yes
no
no