Installing And Removing A Board; Remove The Slot Cover - Fujitsu Siemens Computers Primergy Econel 100 Series Operating Manual

System expansions

Installing and removing a board

The number, position and arrangement of the board slots on the mainboard can be found in
the manual for the mainboard. Boards may already be installed on shipment.
Board, Board,

Remove the slot cover.

► Open the casing (see
Do not throw away the slot cover. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
48
"Opening the casing", Page
1
2
37).
► Loosen the screw (1).
► Pull the slot cover out of the slot (2).
A26361-K1182-Z120-1-7619, edition 3