Panic Messages; A.1.2 Panic Messages - Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual

Fujitsu siemens servers dynamic reconfiguration (dr) user's guide
Table of Contents

Advertisement

[Explanation] Suspending device drivers
DR: in-kernel unprobe board <board>
[Explanation] Unprobing the board.
A.1.2

PANIC Messages

URGENT_ERROR_TRAP is detected during FMA.
[Explanation] A fatal HW error was encountered during copy-rename.
[Remedy] Please contact customer service.
Failed to remove CMP X LSB NN
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
drmach_copy_rename_fini: invalid op code <opcode>
[Explanation] Internal error happened during kernel migration.
[Remedy] Please contact customer service.
Cannot locate source or target board
[Explanation] Cannot locate source or target board during kernel migration.
[Remedy] Please contact customer service.
Could not update device nodes
[Explanation] Could not update device nodes during kernel migration.
[Remedy] Please contact customer service.
Irrecoverable FMEM error <error code>
[Explanation] Internal error during kernel migration
[Remedy] Please contact customer service.
scf fmem request failed error code = 0x<error code>
[Explanation] Internal error during kernel migration
[Remedy] Please contact customer service.
scf_fmem_end() failed rv=0x<error code>
Appendix A Message Meaning and Handling
A-3

Advertisement

Table of Contents
loading

Table of Contents

Save PDF