Table of Contents
Advertisement
TABLE 3-6
Display items
Status
The following example shows a display of the showdomainstatus (8) command.
Example: Display of information on all domains
■
XSCF> showdomainstatus
DID
00
01
02
03
3.1.3
Displaying System Board Information
The showboards(8) command displays system board information including the
domain ID of the domain to which the target system board belongs and various
kinds of system board status in list format.
Use the showboards(8) command before a DR operation to determine whether the
system board status permits DR operations, and to confirm the domain ID of the
domain to which the target system board belongs. The showboards(8) command is
also used after a DR operation to confirm system board status.
To change domain settings or register a system board in the DCL, use the setdcl(8)
command. To change PSB settings, use the setupfru(8) command.
3-6
SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User's Guide • September 2007
Items of Domain Information to be Displayed (Continued)
Description
Domain status
Powered Off
Initialization Phase
OpenBoot Executing
Completed
Booting/OpenBoot
PROM prompt
Running
Shutdown Started
Panic State
Status
Running
Powered Off
-
Running
Domain power is off.
POST processing or OpenBoot PROM
initialization is in progress.
Initialization by OpenBoot PROM is completed.
Solaris OS is being booted or, due to the domain
shutdown or reset, the system is in the OpenBoot
PROM running state, or is suspended in the
OpenBoot PROM (ok prompt) state.
Solaris OS is running.
Solaris OS is being shut down.
Solaris OS panic occurred.
Advertisement
Table of Contents
