Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual page 123

Fujitsu siemens servers dynamic reconfiguration (dr) user's guide
Table of Contents

Advertisement

dr_pre_release_cpu: thread(s) bound to cpu X
[Explanation] The thread in the process is bound to the detached CPU X.
[Remedy] Check if the process bound to the CPU exists by pbind(1M) command.
If it exists, unbind from the CPU and repeat the action.
dr_pre_release_mem: unexpected kphysm_del_release return
value #
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
dr_pt_ioctl: invalid passthru args
[Explanation] Invalid argument is passed to the driver or there may be
inconsistency in the system.
[Remedy] Repeat the action. If this error message appears again, please contact
customer service.
dr_release_mem: unexpected kphysm error code #, id 0xX
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
dr_release_mem_done: mem-unit (X.Y): deleted memory still found
in phys_install
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
dr_release_mem_done: target: mem-unit (X.Y): deleted memory
still found in phys_install
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
dr_release_mem_done: unexpected kphysm_del_release return
value #
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
dr_reserve_mem_spans memory reserve failed. Unexpected
kphysm_del_span return value #; basepfn=# npages=#
[Explanation] The selected target board can no longer fit all the kernel memory of
the source board since it was last selected.
Appendix A Message Meaning and Handling
A-7

Advertisement

Table of Contents
loading

Table of Contents