Fujitsu Siemens Computers SPARC Enterprise M5000 User Manual page 133

[Output] Console and Standard Output
Cannot setup resource map opl-fcodemem
[Explanation] Resource memory mapping cannot be set up.
[Remedy] Please contact customer service.
opl_cfg failed to load, error=<errno>
[Explanation] opl_cfg module failed to load.
[Remedy] Please contact customer service.
IKP: failed to read HWD header
[Explanation] The header of the hardware descriptor could not be read.
[Remedy] Please contact customer service.
IKP: create cpu (<board>-<chip>-<core>-<cpu>) failed
[Explanation] There was a problem creating the device node for a cpu.
[Remedy] Please contact customer service.
IKP: create core (<board>-<chip>-<core>) failed
[Explanation] There was a problem creating the device node for a core.
[Remedy] Please contact customer service.
IKP: create chip (<board>-<chip>) failed
[Explanation] There was a problem creating the device node for a chip.
[Remedy] Please contact customer service.
IKP: create pseudo-mc (<board>) failed
[Explanation] There was a problem creating the pseudo-mc device node for the
board.
[Remedy] Please contact customer service.
opl_claim_memory - unable to allocate contiguous memory of size
zero
[Explanation] A claim request with size zero was issued by the fcode interpreter.
[Remedy] If DR failed after this message, please contact customer service.
opl_claim_memory - vhint is not zero vhint=0x<vhint> - Ignoring
Argument
Appendix A Message Meaning and Handling A-17