Itu Assembly Removal; Itu Drive Assembly Removal - Lexmark 13P0195 - C 750dn Color Laser Printer Service Manual

ITU assembly removal

See "ITU assembly" on page 7-25
1.
Open the front cover.
2.
Remove the toner cartridges.
3.
Open the MPF.
4.
Raise the ITU release lever (A) and slide the ITU from the printer.

ITU drive assembly removal

See "ITU motor drive assembly with SKC motor" on page 7-27
1.
Remove the RIP board shield assembly. See
2.
Remove the engine board shield. See
3.
Remove the ITU drive assembly mounting screws (A) and disconnect the cable.
4.
Move the bottom of the ITU drive assembly toward you as you rotate the top of the assembly out of the
printer. Be careful not to damage the large drive gear as you remove the ITU drive assembly.
for the part number.
"RIP board shield assembly removal" on page
"Engine board shield removal" on page
for the part number.
4-30.
Repair information
5060-00x
4-71.
4-37