Table of Contents
Advertisement
5060-00x
Partial Print Test
Diagnostic procedure for missing or faded planes
1.
Turn the printer off.
2.
Remove all cartridges and the ITU.
3.
Inspect the bellcranks.
4.
Enter the Configuration Menu. See
5.
Select Prt Quality Pgs and press Select.
6.
Open the vacuum transport belt (VTB) jam access door and watch the test pages pass from left to right
over the VTB.
There is a delay between the first and second page.
7.
Once the pages are printed, examine the pages for to confirm the color plane is not printing.
Note: The third page is particularly important since it is the image on the belt when the test printed.
8.
Select Prt Quality Pgs and press Select.
Open the VTB through the access door and, once again, watch the test pages pass over the VTB.
9.
When the top half of the second page passes over the VTB, quickly open the front cover. The printing
stops.
10.
Remove all four toner cartridges and set them face down.
A-16
Service Manual
"Entering CONFIG MENU" on page
Approximate
final stopping
place
3-7.
Advertisement
Table of Contents
