Table of Contents
Advertisement
5060-00x
Reset Fuser Cnt
This only displays if the Maintenance Warning and Intervention function is enabled in the printer Configuration
ID. The fuser maintenance page counter is incremented when a page is printed and incremented by two when a
duplex sheet is printed. The counter can be used to track printer usage. When the counter reaches 150,000, the
printer posts a fuser maintenance message on the operator panel.
1.
Select Reset Fuser Cnt from the CONFIG MENU to view the page count.
2.
Press Return to return to the previous menu or press Select to reset the maintenance page counter back
to zero.
Prt Quality Pgs
The Print Quality Test consists of five pages. Pages one and two contain a mixture of graphics and text. The
remainder of the pages only contain graphics. Use this test to identify print quality problems. The Test Pages
must be printed on A4, Legal or Letter paper.
1.
Select Prt Quality Pgs from the CONFIG MENU.
2.
. Press Select to print the pages.
Go to
"Print Quality Pages—Title page (total of five)" on appendix page B-3
the pages.
Color Trapping
Color trapping is an aid to graphics and text. When a text or graphics appear over other colors, a misalignment
may allow white paper to show through at the borders of the colors. Color trapping reduces the cutout area
under the upper image so a slight misalignment does not show.This only affects PostScript emulation printing.
Select Color Trapping from the CONFIG MENU. The values are:
=Off
=1...... 5(2*)
SIZE SENSING
Only paper sources that support Size Sensing are displayed.
1.
Select Size Sensing from the CONFIG MENU.
2.
Select a tray. Only those trays with size sensing display. These can include:
Tray 1 Sensing
Tray 2 Sensing
Tray 3 Sensing
Tray 4 Sensing
3.
Select Auto to turn size sensing on for that tray, or select Off to disable size sensing.
4.
Select Return to exit.
3-8
Service Manual
for representative samples of
Advertisement
Table of Contents
