5060-00x
Engine board shield removal
See
"Engine board shield" on page 7-39
1.
Remove the RIP board shield assembly. See
2.
Remove the engine board. See
3.
Remove the engine board shield screw type
Friction buckler removal
See
"Friction buckler" on page 7-21
1.
Press the multipurpose feeder (MPF) latch to disconnect the MPF.
2.
Use needlenose pliers to remove the buckler housing.
3.
Replace the friction buckler.
4-30
Service Manual
for the part number.
"RIP board shield assembly removal" on page
"Engine board removal" on page
"323"
(A), screw type
for the part number.
4-29.
"232"
(B), and remove the shield.
4-71.