Table of Contents
Advertisement
Bin x Full—no message that Bin x is full
Step
Action and questions
1
Bin x sensor (Bin x=sensor 1 through 5)—make sure
the sensor is seated correctly in the side of tray x.
Is the sensor seated correctly?
2
Bin x sensor cable—make sure that Bin x sensor cable
is connected to the sensor and to the control board.
Is the sensor cable connected correctly?
3
Bin x sensor flag—check the Bin x sensor flag for
binding and proper operation.
Are there any problems with the sensor flag?
4
Bin x sensor cable—check the continuity of the sensor
cable.
Is there continuity?
Ready - Bin x Full displays and paper feeds into bin x
Step
Action and questions
1
Bin x sensor flag—make sure the Bin x sensor flag is
not in the up position and is operating correctly.
Is the sensor flag operating correctly?
Yes
No
Go to step 2
Install the sensor
correctly
Go to step 3
Install the sensor
cable correctly
Repair or replace
Go to step 4
the sensor flag
Replace the Bin x
Replace the Bin x
sensor
cable
Yes
No
Replace the Bin x
Repair or replace
sensor. If this does
as necessary
not fix the problem
replace the control
board.
Diagnostic information
5060-00x
2-107
Advertisement
Table of Contents
