Table of Contents
Advertisement
Rear roll
Reach around and depress the latch (A) on the side of the shaft and remove the tire.
Installation notes:
•
Replace both rollers at the same time.
•
When you replace the front roller, make sure the roller is pressed against the shaft and the screw is
fastened all the way down.
•
When replacing both the front and back rollers, note the directional markings on the rollers and make sure
the same narrow hub caps are facing each other. Check to see if the rollers turn freely.
•
The autocompensator pick rolls are located in the base machine. There are also rollers in all tray options. If
you have additional trays beneath your printer, check the condition of these rollers when you replace the
rollers in your printer.
5060-00x
4-49
Repair information
Advertisement
Table of Contents
