Table of Contents
Advertisement
Removal procedures
CAUTION: Remove the power cord from the printer or electrical outlet before you connect or disconnect any
cable or electronic board or assembly for personal safety and to prevent damage to the printer. Disconnect any
connections between the printer and PCs/peripherals. The printer weighs 47.7 kg (105 lb) and requires at least
two people to lift it safely. Make sure your fingers are not under the printer when you lift or set the printer down.
Note: Some removal procedures require removing cable ties. You must replace cable ties during reassembly to
avoid pinching wires, obstructing the paper path, or restricting mechanical movement.
Top cover assembly removal
1.
Remove the redrive cap.
2.
Remove the right light shield screw type
3.
Remove the right light shield.
"324"
(A) and
"323"
(B) and release tab (C) from the frame slot.
5060-00x
4-5
Repair information
Advertisement
Table of Contents
