Table of Contents
Advertisement
8.
Securely close the front cover or reattach if previously removed.
9.
If replacing the black printhead, go to step 12. Otherwise, enter Diagnostics Mode:
a.
Turn the printer off.
b.
Press and hold Go and Return.
c.
Turn the printer on.
Release the buttons when Performing Self Test displays.
d.
10.
Select Alignment Menu, select the color of the printhead that was replaced, and set the Z value to zero.
Exit the Diagnostics Menu
With the printer at Ready prompt, hook up a computer through the USB, network, or parallel connection
11.
and send the file, PHALIGN6.FLS, from the enclosed CD to the printer.
Note: Lay the printed Printhead Mechanical Alignment Test Page across the printheads in this orientation
as a reference. Use the magnifier lens included in the FRU to view the scales at the ends of the color lines.
5060-00x
4-55
Repair information
Advertisement
Table of Contents
