Table of Contents
Advertisement
Output expander
A sheet of paper is jammed prior to the pass thru sensor flag or a sheet of paper feeds out to the standard bin
even though bin x is selected. Paper exits half way out of the redrive.
Note: For this type of problem check the
problem. 202 Paper Jam messages can also occur prior to the output expander pass thru sensor.
Step
Actions and questions
1
Check of mechanical drive components:
• Check the output expander drive belt to make sure
it is installed on the drive pulley and belt idler pulley.
• Check the belt tension spring to make sure it is not
loose or broken.
Are there any problems with these parts?
2
Check of mechanical linkage/DC motor drive assembly:
• Check to see if the DC motor is functioning
properly.
• Check the gears, clutch and other linkage parts for
correct operation and wear, broken teeth, or
damaged parts.
Are there any problems with these parts?
"Sub error code table" on page
2-17. They can help isolate the
Yes
No
Repair or replace
Go to step 2
as necessary
Replace the
Call your next level
mechanical
support
linkage/DC motor
drive assembly
Diagnostic information
5060-00x
2-75
Advertisement
Table of Contents
