Show Snmp Community - D-Link DGS-3620-52P Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
delete snmp community <community_string 32>
Parameters
<community_string 32> - Specify the community string that will be deleted.
Restrictions
Only Administrator-level users can issue this command.
Example
To delete an SNMP community:
DGS-3620-28SC:admin#delete snmp community dlink
Command: delete snmp community dlink
Success.
DGS-3620-28SC:admin#

89-10 show snmp community

Description
This command is used to display community string configurations.
Format
show snmp community {<community_string 32>}
Parameters
<community_string 32> - (Optional) Specify the community string to be displayed.
Note: If a community string is not specified, all community string information will be
displayed.
Restrictions
None.
Example
To display the current community string configurations:
DGS-3620-28SC:admin#show snmp community
Command: show snmp community
SNMP Community Table
955