D-Link DGS-3620-52P Manual page 917

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
config rip timers {update <sec 5-65535> | timeout <sec 5-65535> | garbage_collection <sec
5-65535>} (1)
Parameters
update - (Optional) Specifies the value of the rate at which RIP updates are sent.
<sec 5-65535> - Enter the update value used here. This value must be between 5 and 65535
seconds.
timeout - (Optional) Specifies the value of the time after which a RIP route is declared to be
invalid.
<sec 5-65535> - Enter the timeout value used here. This value must be between 5 and 65535
seconds.
garbage_collection - (Optional) Specifies the value of the time for which a RIP route will be kept
before it is removed from routing table.
<sec 5-65535> - Enter the garbage collection value used here. This value must be between 5
and 65535 seconds.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the RIP timers:
DGS-3620-28SC:admin# config rip timers update 60 timeout 360 garbage_collection
240
Command: config rip timers update 60 timeout 360 garbage_collection 240
Success.
DGS-3620-28SC:admin#
83-4 disable rip
Description
This command is used to disable RIP for the switch.
Format
disable rip
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
912