D-Link DGS-3620-52P Manual page 590

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
enable l2protocol_tunnel
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the Layer 2 protocol tunneling function:
DGS-3620-28SC:admin# enable l2protocol_tunnel
Command: enable l2protocol_tunnel
Success.
DGS-3620-28SC:admin#
50-4 disable l2protocol_tunnel
Description
Used to disable the Layer 2 protocol tunneling function.
Format
disable l2protocol_tunnel
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the Layer 2 protocol tunneling function:
585