D-Link DGS-3620-52P Manual page 621

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#
53-14 show lldp_med
Description
This command is used to display the switch's general LLDP-MED configuration status.
Format
show lldp_med
Parameters
None.
Restrictions
None.
Example
To display the switch's general LLDP-MED configuration status:
DGS-3620-28SC:admin#show lldp_med
Command: show lldp_med
LLDP-MED System Information:
Device Class
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer Name
Model Name
Asset ID
PoE Device Type
PoE PSE Power Source
LLDP-MED Configuration:
Fast Start Repeat Count
LLDP-MED Log State:Disabled
DGS-3620-28SC:admin#
: Network Connectivity Device
: A1
: 1.00.012
: 1.00.034
: D1234567890
: D-Link
: DGS-3620-28SC Gigabit Ethernet S
:
: PSE Device
: Primary
: 4
616