D-Link DGS-3620-52P Manual page 622

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
53-15 show lldp_med local_ports
Description
This command is used to display the per-port LLDP-MED information currently available for
populating outbound LLDP-MED advertisements.
Format
show lldp_med local_ports {<portlist>}
Parameters
<portlist> - Specify a range of ports to be displayed.
Note: When a port list is not specified, information for all ports will be displayed.
Restrictions
None.
Example
To display LLDP-MED information currently available for populating outbound LLDP-MED
advertisements for port 1:
DGS-3620-28SC:admin#show lldp_med local_ports
Command: show lldp_med local_ports 1
Port ID
-----------------------------------------------------------------
LLDP-MED Capabilities Support:
Capabilities
Network Policy
Location Identification
Extended Power Via MDI PSE :Not Support
Extended Power Via MDI PD
Inventory
Network Policy:
None
Extended Power Via MDI:
None
DGS-3620-28SC:admin#
53-16 show lldp_med remote_ports
Description
This command is used to display LLDP-MED information learned from neighbors.
: 1
:Support
:Support
:Not Support
:Not Support
:Support
617
1