D-Link DGS-3620-52P Manual page 727

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#show snmp traps linkchange_traps
Command: show snmp traps linkchange_traps
Linkchange Traps
Port 1 : Enabled
Port 2 : Enabled
Port 3 : Enabled
Port 4 : Enabled
Port 5 : Enabled
Port 6 : Enabled
Port 7 : Enabled
Port 8 : Enabled
Port 9 : Enabled
Port 10: Enabled
Port 11: Enabled
Port 12: Enabled
Port 13: Enabled
Port 14: Enabled
Port 15: Enabled
Port 16: Enabled
Port 17: Enabled
Port 18: Enabled
Port 19: Enabled
Port 20: Enabled
CTRL+C ESC q Quit
66-18 config snmp coldstart_traps
Description
This command is used to configure the trap state for coldstart events.
Format
config snmp coldstart_traps [enable | disable]
Parameters
enable - Enable traps for coldstart events. The default state is enabled.
disable - Disable traps for coldstart events.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable traps for coldstart events:
DGS-3620-28SC:admin#config snmp coldstart_traps enable
Command: config snmp coldstart_traps enable
: Enabled
SPACE n Next Page ENTER Next Entry a All
722