Enable Mirror; Disable Mirror - D-Link DGS-3620-52P Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin# delete mirror group_id 3
Command: delete mirror group_id 3
Success.
DGS-3620-28SC:admin#
59-5

enable mirror

Description
This command, combined with the disable mirror command below, allows you to enable or disable
mirror function without having to modify the mirror session configuration.
Note: If the target port hasn't been set, enable mirror will not take effect.
Format
enable mirror
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable mirroring configurations:
DGS-3620-28SC:admin#enable mirror
Command: enable mirror
Success.
DGS-3620-28SC:admin#
59-6

disable mirror

Description
This command, combined with the enable mirror command above, allows you to enable or disable
mirror function without having to modify the mirror session configuration.
Format
disable mirror
661