D-Link DGS-3620-52P Manual page 1057

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
<ipv6addr> - Specify the IPv6 address of the destination end station.
ttl - (Optional) Specify the time to live value of the trace route request.
<value 1-60> - Specify the time to live value of the trace route request. This is the maximum
number of routers that a trace route packet can pass while seeking the network path
between two devices. The range for the TTL is 1 to 60 hops. The default value is 30.
port - (Optional) Specify the port number.
<value 30000-649000> - Specify the port number. The value range is from 30000 to 64900.
The default is 33435.
timeout - (Optional) Specify the timeout period while waiting for a response from the remote
device.
<sec 1-65535> - Specify the timeout period while waiting for a response from the remote
device. A value of 1 to 65535 seconds can be specified. The default is 5 seconds.
probe – (Optional) Specify the number of probes.
<value 1-9> - Specify the number of probes. The range is from 1 to 9. If unspecified, the
default value is 1.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
Trace the IPv6 routed path between the switch and 3000::1:
DGS-3620-28SC:admin# traceroute6 3000::1 probe 3
Command: traceroute6 3000::1 probe 3
1 <10 ms. 1345:142::11
2 <10 ms. 2011:14::100
3 <10 ms. 3000::1
Trace complete.
DGS-3620-28SC:admin#
Trace the IPv6 routed path between the switch and 1210:100::11 with port 40000:
DGS-3620-28SC:admin# traceroute6 1210:100::11 port 40000
Command: traceroute6 1210:100::11 port 40000
1 <10 ms. 3100::25
2 <10 ms. 4130::100
3 <10 ms. 1210:100::11
Trace complete.
DGS-3620-28SC:admin#
103-20 telnet
Description
This command is used to login a Telnet server.
1052