D-Link DGS-3620-52P Manual page 556

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
To show the ND snooping maximum entry information for ports 1-5:
DGS-3620-28SC:admin#show address_binding nd_snoop ports 1:1-1:5
Command: show address_binding nd_snoop ports 1:1-1:5
Port Max Entry
---- ---------
1:1 No Limit
1:2 No Limit
1:3 No Limit
1:4 No Limit
1:5 No Limit
DGS-3620-28SC:admin#
46-24 show address_binding nd_snoop binding_entry
Description
This command is used to show the ND snooping binding entries on the Switch.
Format
show address_binding nd_snoop binding_entry {port <port>}
Parameters
port - (Optional) Specifies a port used for this display.
<port> - Enter the port number used for this display here.
Restrictions
None.
Example
To display the ND snooping binding entry:
DGS-3620-28SC:admin# show address_binding nd_snoop binding_entry
Command: show address_binding nd_snoop binding_entry
S (Status) - A: Active, I: Inactive
Time - Left Time (sec)
IP Address
----------------------------------------- ------------------ -- -------- ----
2001:2222:1111:7777:5555:6666:7777:8888
2001::1
Total Entries : 2
DGS-3620-28SC:admin#
MAC Address
00-00-00-00-00-02
00-00-00-00-03-02
551
S LT(sec) Port
I 50 5
A 100 6