D-Link DGS-3620-52P Manual page 1152

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
port: Represents the logical port number.
BPDU Attack
Event description: BPDU attack happened.
Protection
Log Message: Port<[unitID:]portNum> enter BPDU under
protection state (mode: drop / block / shutdown)
Parameters description:
unitID: The unit ID.
portNum: The port number.
mode:The BPDU currnt state
Event description: BPDU attack automatically recover.
Log Message: Port <[unitID:]portNum> recover from BPDU
under protection state automatically
Parameters description:
unitID: The unit ID.
portNum: The port number.
Event description: BPDU attack manually recover.
Log Message: Port<[unitID:]portNum> recover from BPDU
under protection state automatically
Parameters description:
unitID: The unit ID.
portNum: The port number.
External
Event description: External alarm occurred
Alarm
Log Message: [Unit <unitID>] External Alarm Channel
<channel_id> : <alarm_message>
Parameters description:
unitID: The unit ID.
channel_id: Represent the channel ID detected the external
alarm
alarm_message: Alarm message when alarm occurred, this is
configurable by user.
RIPng Event description: The RIPng state of interface changed
Log Message: RIPng protocol on interface <intf-name> changed
state to <enabled | disabled>
Parameters description:
intf-name: Interface name.
DLMS Event Description:
Input an illegal activation code.
Log Message:
Informational
Informational
Informational
Critical
Informational
1147
Informational