D-Link DGS-3620-52P Manual page 561

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable JWAC redirect:
DGS-3620-28SC:admin#disable jwac redirect
Command: disable jwac redirect
Success.
DGS-3620-28SC:admin#
47-5 enable jwac forcible_logout
Description
This command is used to enable JWAC forcible logout. When enabled, a Ping packet from an
authenticated host to the JWAC Switch with TTL=1 will be regarded as a logout request, and the
host will be moved back to unauthenticated state.
Format
enable jwac forcible_logout
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable JWAC forcible logout:
DGS-3620-28SC:admin#enable jwac forcible_logout
Command: enable jwac forcible_logout
Success.
DGS-3620-28SC:admin#
556