D-Link DGS-3620-52P Manual page 936

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
87-6 delete sflow flow_sampler ports
Description
This command is used to delete the sFlow flow sampler.
Format
delete sflow flow_sampler ports [<portlist> | all]
Parameters
<portlist> - Specify the list of ports to be deleted.
all - Specify to delete all ports.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete the sFlow flow sampler for ports 1 to 3:
DGS-3620-28SC:admin#delete sflow flow_sampler ports 1-3
Command: delete sflow flow_sampler ports 1-3
Success.
DGS-3620-28SC:admin#
87-7 create sflow analyzer_server
Description
This command is used to create the sFlow flow sampler ports.
Format
create sflow analyzer_server <value 1-4> owner<name 16> {timeout [<sec 1-2000000> |
infinite] | collectoraddress [<ipaddr> | <ipv6addr>] | collectorport <udp_port_number 1-
65535> | maxdatagramsize <value 300-1400>}
Parameters
<value 1-4> - Specify a value between 1 and 4.
owner - Specify the entity making use of this sflow analyzer server. When owner is set or
modified, the timeout value will become 400 automatically.
<name 16> - Specify the entity making use of this sflow analyzer server. When owner is set or
modified, the timeout value will become 400 automatically.
timeout - (Optional) Specify the length of time before the server is timed out. When the analyzer
server times out, all of the flow samplers and counter pollers associated with this analyzer
server will be deleted. If not specified, its default value is 400. If it is specified as infinite, the
server will never time out.
931