D-Link DGS-3620-52P Manual page 1132

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
num: The number of prefix received.
limit: Max number of prefix allowed to receive.
ipaddr: IP address of BGP peer.
Event description: The total bgp prefix number received
exceeds the limit.
Log Message: [BGP(9):] The total number of prefix received
reaches max prefix limit.
Stacking Event description: Hot insertion.
Log Message: Unit: <unitID>, MAC: <macaddr> Hot insertion.
Parameters description:
unitID: Box ID.
Macaddr: MAC address.
Event description: Hot removal.
Log Message: Unit: <unitID>, MAC: <macaddr> Hot removal.
Parameters description:
unitID: Box ID.
Macaddr: MAC address.
Event description: Stacking topology change.
Log Message: Stacking topology is <Stack_TP_TYPE>.
Master(Unit <unitID>, MAC:<macaddr>).
Parameters description:
Stack_TP_TYPE: The stacking topology type is one of the
following:
1. Ring,
2. Chain.
unitID: Box ID.
Macaddr: MAC address.
Event description: Backup master changed to master.
Log Message: Backup master changed to master. Master (Unit:
<unitID>).
Parameters description:
unitID: Box ID.
Event description: Slave changed to master
Log Message: Slave changed to master. Master (Unit: <unitID>).
Parameters description:
unitID: Box ID.
Event description: Box ID conflict.
Log Message: Hot insert failed, box ID conflict: Unit <unitID>
warning
Informational
Informational
Informational
Informational
Informational
Critical
1127