D-Link DGS-3620-52P Manual page 576

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
3 172.18.0.0/21
DGS-3620-28SC:admin#
47-26 show jwac ports
Description
This command is used to display the port configuration of JWAC.
Format
show jwac ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a port range to show the configuration of JWAC.
Restrictions
None.
Example
To display JWAC ports 1 to 4:
DGS-3620-28SC:admin#show jwac ports 1-4
Command: show jwac ports 1-4
Port State
----- --------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
DGS-3620-28SC:admin#
47-27 clear jwac auth_state
Description
This command is used to clear authentication entries.
Format
clear jwac auth_state [ports [all | <portlist>] {authenticated | authenticating | blocked} |
mac_addr <macaddr>]
TCP 3
Aging Time Idle Time
(min) (min)
---------- ---------
1440 Infinite
1440 Infinite
1440 Infinite
1440 Infinite
Active
Block Time Max
(sec) Hosts
---------- -----
60 100
60 100
60 100
60 100
571