D-Link DGS-3620-52P Manual page 1012

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
<portlist> - Enter a list of ports used for this configuration here.
mac_based_vlan - Specifies that the MAC-based VLAN classification is precedence than subnet
VLAN classification
subnet_vlan - Specifies that the subnet VLAN classification is precedence than MAC-based
VLAN classification
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure subnet VLAN classification precedence on port 1:
DGS-3620-28SC:admin# config vlan_precedence ports 1 subnet_vlan
Command: config vlan_precedence ports 1 subnet_vlan
Success.
DGS-3620-28SC:admin#
96-5 show vlan_precedence ports
Description
This command is used to display the VLAN classification precedence.
Format
show vlan_precedence ports {<portlist>}
Parameters
<portlist> - (Optional) Specifies the list of ports used for this display.
Restrictions
None.
Example
To display VLAN classification precedence on ports 1-5:
1007