D-Link DGS-3620-52P Manual page 833

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
You can check the detailed info for a specific multicasting routing entry by specifying the options in
the command. To show the detailed info of the multicast routing entries for a specific group, you
should specify the group address.
DGS-3620-28SC:admin# show pim6 mroute group FF13::100
Command: show pim6 mroute group FF13::100
(*, G) Entry for group FF13::100
---------------------------------------------
RP Address : 3FFE:10:10::153
Upstream : n1
Upstream State : Joined
RPF Neighbor : FE80::68FE
Local Member : n30
Assert Lost : -
Assert Won : -
Outgoing : n10 n30
(S, G) Entry for group FF13::100
---------------------------------------------
Source : 2001::1111
Outgoing: n10
Source : 2001::1111
Outgoing: -
Source : 2001::3F6D
Outgoing: n20
Total Entries: 4
DGS-3620-28SC:admin#
To show the detailed info of the multicast routing entries for the specific (S,G), you should specify
the group address and the source address.
DGS-3620-28SC:admin# show pim6 mroute group FF13::100 source 2001::1111
Command: show pim6 mroute group FF13::100 source 2001::1111
(S, G) Entry for group FF13::100 source 2001::1111
---------------------------------------------
RPT Bit
Upstream
Upstream State
RPF Neighbor
SPT Bit
Keepalive Timer
Register State
Register-Stop Timer : 10 sec
Local Member
Assert Lost
Upstream: n2
rpt, Upstream: n1
Upstream: n2
: False
: n2
: Joined
: FE80::12ED
: True
: 60 sec
: Prune
: n30
: n20
828