Enable Sntp - D-Link DGS-3620-52P Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To show SNTP:
DGS-3620-28SC:admin#show sntp
Command: show sntp
Current Time Scource
SNTP Status
IPv4 Primary SNTP Server
IPv4 Secondary SNTP Server: None
IPv6 Primary SNTP Server
IPv6 Secondary SNTP Server: None
SNTP Poll Interval
DGS-3620-28SC:admin#

101-4 enable sntp

Description
This command is used to turn on SNTP support.
Format
enable sntp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable SNTP:
DGS-3620-28SC:admin#enable sntp
Command: enable sntp
Success.
DGS-3620-28SC:admin#
: System Clock
: Disabled
: None
: None
: 720 sec
1026