D-Link DGS-3620-52P Manual page 1083

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
enable - Specify to enable GVRP.
disable - Specify to disable GVRP.
name - Specify the VLAN name.
<vlan_name 32> - The maximum length is 32 characters.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add 4 through 8 as tagged ports to the VLAN 1:
DGS-3620-28SC:admin#config vlan vlanid 1 add tagged 4-8
Command: config vlan vlanid 1 add tagged 4-8
Success.
DGS-3620-28SC:admin#
To delete ports 4 through 8 from VLAN 1:
DGS-3620-28SC:admin#config vlan vlanid 1 delete 4-8
Command: config vlan vlanid 1 delete 4-8
Success.
DGS-3620-28SC:admin#
To enable the VLAN default advertisement:
DGS-3620-28SC:admin#config vlan vlanid default advertisement enable
Command: config vlan vlanid default advertisement enable
Success.
DGS-3620-28SC:admin#
106-7 config port_vlan
Description
This command is used to set the ingress checking status and the sending and receiving of GVRP
information.
Format
config port_vlan [<portlist> | all] {gvrp_state [enable | disable] | ingress_checking [enable |
disable] | acceptable_frame [tagged_only | admit_all] | pvid <vlanid 1- 4094>} (1)
1078