Dynamic Methods Of Setting The Printer's Ip Address - Fuji Xerox DocuPrint CM405 df User Manual

 Dynamic Methods of Setting the Printer's IP Address
There are two protocols available for dynamically setting the printer's IP address:
• DHCP (enabled by default)
• AutoIP
You can turn on/off both protocols using the operator panel or CentreWare Internet Services.
NOTE:
• You can print a report that includes the printer's IP address. On the operator panel, press the
Report / List, select System Settings, and then select Print. The IP address is listed on the System Settings page.
Using the Operator Panel
To turn on/off either the DHCP or AutoIP protocol:
1
On the operator panel, press the
2
Select Tools tab.
3
Select Admin Settings.
4
Select Network.
5
Select Ethernet.
6
Select TCP/IP.
7
Select Get IP Address.
8
Select DHCP / AutoIP, and then select OK.
Using CentreWare Internet Services
To turn on/off either the DHCP or AutoIP protocol:
1
Launch your web browser.
2
Enter the IP address in the browser's address field, and then press the Enter key.
3
Select Properties.
4
Select the Protocol Settings folder on the left navigation panel.
5
Select TCP/IP.
6
In the Get IP Address field, select the DHCP / Autonet option.
7
Click the Apply button.
(System) button.
Printer Connection and Software Installation
(System) button, select
95