Collated - Fuji Xerox DocuPrint CM215 Series User Manual

Collated

Sort the copy outputs. For examples, if you make two copies of three page documents, first set of
three-pages documents will be printed followed by the second set.
NOTE:
• Copying documents with a large amount of data may exhaust available memory. If a memory shortage occurs,
cancel the collating by turning Collated to Uncollated on the
1
For the DocuPrint CM215 f/CM215 fw, firstly load the top edge of document(s) with facing up into
the ADF or place a single document facing down on the
cover.
For the DocuPrint CM215 b, place a single document facing down on the
close the document
See also:
• "Making Copies From the ADF (DocuPrint CM215 f/CM215 fw Only)" on page 166
• "Making Copies From the Document Glass" on page 164
2
Press the (Copy) button.
3
Select Collated, and then press the
4
Select the desired setting, and then press the
NOTE:
• Asterisk (*) is the factory default setting.
Uncollated*
Collated
Auto
(DocuPrint CM215 f/CM215 fw only)
5
If necessary, customize the copy settings such as the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 167
6
Press the (Start) button to begin copying.
170 Copying
cover.
Does not sort the copy output.
Sorts the copy outputs.
operator
document glass
button.
button.
panel.
and close the document
document glass, and