Modifying A System Operator - Alcatel-Lucent 8950 AAA User Manual

Configuring 8950 AAA Operators
............................................................................................................................................................................................................................................................
Table 11-8 Access Rules–Access Type and Access Level Components
Access Type
Command
Role
2. After selecting the access level, the access rule is complete.
Click OK to save and return to the Operator Properties tab
OR
Click Cancel to return without saving.
Result:
Add additional Access rules as necessary.
Important!
should place more general rules near the bottom and more specific rules near the top of
the list of rules.

Modifying a System Operator

How to modify a System Operator
The following procedure lists the steps for changing the attributes of a System Operator.
1. From the Operators tab on the 8950 AAA Operators panel, select the operator to be
modified.
2. Double click on the operator or select the Edit selected record panel control button.
Result:
selected operator as shown in
............................................................................................................................................................................................................................................................
1 1 -1 6
Access Level
On
Off
On
Off
The Operator Properties tab appears with the new rule.
Access Rules are applied in order, the first matching rule is selected. You
The Operator Properties screen appears with the current information about the
Description
Allows command execution
Denies command execution
Allows access to a particular role for
methods execution
Denies access for method execution
Figure 11-13.
Modifying a System Operator
365-360-001R6.0
Issue 1, December 2008