Server Connection Setup; Figure 7.41 [Setup Remote Support] Screen - Fujitsu Eternus DX60 User Manual

Chapter 7 Setup

7.5 Server Connection Setup

3
4
7.5 Server Connection Setup
Perform the settings required to connect to the server and install the required drivers. Perform
the settings required for network devices connecting the server and the ETERNUS DX60/DX80/
DX90. Check the connection between the server and the device.
Refer
Set each item under "Customer Information" and "Communication Environment
Information" in the [Setup Remote Support] screen.

Figure 7.41 [Setup Remote Support] screen

Click the [Set] button.
The set information is sent to the Remote Support center, and the connection between the
ETERNUS DX60/DX80/DX90 and Remote Support center is checked. The result of con-
nection check is sent to "Mail Address".
"ETERNUS DX60/DX80/DX90 Web GUI User Guide"
"ETERNUS Disk storage systems User's Guide -Server Connection-"
Manuals of the drives to be installed
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
181
End of procedure
P3AM-3042-08ENZ0