Trouble Record; Figure 9.2 Trouble Record (1/2) - Fujitsu Eternus DX60 User Manual

Chapter 9 Operation and Maintenance
9.5 Troubleshooting
9.5.2

Trouble Record

If trouble occurs, record the ETERNUS DX60/DX80/DX90 conditions in
9.3, and contact your maintenance engineer.
Figure 9.2
Trouble Record
1: Please identify your ETERNUS DX60/DX80/DX90 Disk storage system:
(Check the Manufacturer's label)
MODEL
SER.NO.
2: Please enter the following information about your
ETERNUS DX60/DX80/DX90:
Number of drive enclosures
Number of disks
3: Are you using a UPS? If so, what model?
4: What is the state of the following Controller Enclosure LEDs?
POWER (Yes, No)
READY (Yes, No)
FAULT (Yes, No, Blinking)
IDENTIFY (Yes, No)
CACHE (Yes, No, Blinking)
5: What is the state of the following Drive Enclosure LEDs?
POWER (Yes, No)
READY (Yes, No)
FAULT (Yes, No, Blinking)
IDENTIFY (Yes, No)
Trouble record (1/2)
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
215
Figure 9.2 and Figure
P3AM-3042-08ENZ0